Timer Set Setting; Timer Reservations Every Day At The Same Time With The Same; Image Quality - Sanyo DSR-3000P Instruction Manual

TIMER SET SETTING

Use the timer function of the digital video recorder to set the times for timer recording.
Main menu 1
TIMER SET setting
This sets the starting time and stopping time for each day, and also
sets the recording speed.
1
WEEK
This selects the day for the timer setting. While a day is flashing
another day can be selected. The 7th line (SAT) and 8th line
(DLY) are used for setting a timer recording for a period of more
than 24 hours.
2
START
This is used to enter the starting time for timer recording.
3
STOP
This is used to enter the stopping time for timer recording.
4
REC CYCLE
Sets the recording speed.
The initial setting is for FIELD (0.12SEC) recording. If the
setting is changed to frame recording, the recording speed
becomes 0.24SEC.
The numbers in brackets are the result of automatic
calculation of the available time based on the recording
method, picture quality and audio recording settings. The
maximum value that can be displayed is 9999H. If the
available time is 10000H or more, the display appears as
9999 .
*
5
SET
Set to "ON" when using timer recording.
Set to "OFF" when not using timer recording.
6
For setting a timer recording of more than 24 hours.
Use this line for a timer recording of more than 24 hours.
Note: The picture quality, frame/field recording and audio
recording settings for timer recording will be the settings
used for recording in the normal recording area.
Sub-menus
3
2
1
6
48
4
Sets the timer.
5
The timer must be set when carrying out
timer recording.
Timer reservations every day at the
same time with the same image quality
Example: Timer recording every day from 8:30 a.m. to 6:30
p.m. at the same recording speed
1
Press the MENU button to select TIMER SET, and then
turn the shuttle dial clockwise.
The TIMER SET sub-menu appears, and the cursor moves to
SUN.
MENU
2
Turn the shuttle dial clockwise.
"SUN" flashes in the WEEK column.
3
Use the jog dial to change from "SUN" to "DLY", and then
turn the shuttle dial.
"– – " (hours) flashes in the START column.
English