Power Failure/Used Time Display - Sanyo DSR-3000P Instruction Manual

POWER FAILURE/USED TIME DISPLAY

1
Press the MENU button twice to display the MAIN MENU 2
screen.
The cursor moves to DISPLAY SET/VIDEO LOSS SET.
MENU
2
Use the jog dial to move the cursor to the POWER
FAILURE/USED TIME settings, and then turn the shuttle
dial clockwise.
The POWER FAILURE/USED TIME sub-menu appears.
Check the date/time of a power failure or the usage time of
hard disks, etc.
3
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
Main menu 2 Sub-menus
About the sub-menu
1
FAILURE
Shows the date/time when a power failure occurred.
The number of power failures appears at the left. (example:
#020) When the number exceeds 999 it returns to 000.
2
RECOVER
Shows the date/time when power was restored.
3
DISK1 USE
Shows the total hard disk 1 usage time.
4
DISK2 USE
Shows the total hard disk 2 usage time.
5
POWER
Shows the total usage time for this unit.
68
1
2
3
4
5
English