7. TIMER SET
This sets start times for recording in the case of timer recording.
This sets start and stop times for recording as well as recording cycles for each weekday.
1
Select timer recording conditions for each weekday on the pull-down menu on the screen.
2
Click [SAVE] to complete the adjustments (or changes).
1
WEEK
Indicates the weekdays for making timer recordings.
Several timer recordings can also be made at different
times on the same weekday.
2
START
Enter the time for timer recording to start.
3
STOP
Enter the time for timer recording to stop.
Points to note and applications of timer settings
• If timer reservations overlap, the earlier time setting will take precedence for recording.
• If you wish to set the timer to continue for more than 24 hours:
Use the bottom two lines of the setting screen ([SAT] and [DLY]) to make this setting.
1. Switch the setting format by clicking the [OVER 24H] button.
2. Set the start day and time in the upper line.
3. Use the bottom line to specify the stop day and time and recording cycle.
4. When [SET] in the bottom line is set to [ON], timer recording for more than 24 hours will be set.
1
2
3
6
Menu Setting Procedures
4
5
4
REC CYCLE
Set the recording cycle. (See p15)
5
SET
Set this to [ON] to make a timer recording.
Set this to [OFF] if no timer recording is to be made.
6
DLY
Enter start and stop times and a recording cycle in this
item, and set [SET (5)] to [ON], to enable timer recording
at the same time each day.
16
English