Timer Set - Sanyo DSR-3016P Manual For Remote Operation

Manual for remote operation by network connection
Hide thumbs Also See for DSR-3016P:
Table of Contents

Advertisement

7. TIMER SET

This lets you set the conditions for timer recording, such as the timer operating time, separately for
each day of the week.
1
Select the timer recording conditions for each weekday from the menu.
2
Click [SAVE] to complete the timer settings (or changes).
7
1
WEEK
Specifies the weekdays for making timer recordings.
Several timer recordings can also be made at different
times on the same weekday by changing the setting row.
2
START
Enter the time for timer recording to start.
3
STOP
Enter the time for timer recording to stop.
4
PROGRAM
Specify the program to use for recording images. (See p. 9)
5
FPS
Set the recording rate (See p. 13)
The [TIMER SET] menu is for setting the conditions for timer recording. To actually carry out timer recording based
on these setting conditions, you will need to click the Q button on the operating panel. (See p. 6 and 22.)
When the digital video recorder switches to timer recording standby mode and the setting time is reached, timer
recording will start automatically.
The timer recording operation is indicated by a "TIMER STANDBY" or "TIMER RECORDING" message appearing on
the screen.
Points to note and applications of timer settings
• If timer reservations overlap, the earlier time setting will take precedence for recording.
• If you wish to set the timer to continue for more than 24 hours, use the bottom two lines on the setting screen to make this setting.
1. Switch the setting format by clicking the [OVER 24H] button.
2. Use the top line to set the start day and time.
3. Use the bottom line to specify the stop day and the time and recording cycle.
4. When [SET] in the bottom line is set to [ON], timer recording for more than 24 hours will be set.
1
2
3
14
Menu Setting Procedures
4
5
6
6
SET
Set this to "ON" if timer recording is to be carried out.
Set this to "OFF" if timer recording is not to be carried out.
7
DLY
Enter the start and stop times, image recording program
and the recording rate and change [SET] to "ON" to enable
timer recording at the same time each day.
The [DLY] setting conditions take precedence over the
setting conditions that have been made separately for each
day.
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsr-3009p

Table of Contents