Timer Rec Set Tab - Sanyo VA-SW814 Instruction Manual

.  ' # ) A 9 # 8 # 5 9    ) $  D Q Q M   T V R ' ' ' ' ' '  ' '   
MENU SETTINGS (MENU WINDOW)

TIMER REC SET tab

This sets the timer recording conditions for DVRs. Specify the DVR to be set in the DVR list in the
"TARGET" window, and then click
instructions that appear in the dialog box message to select the setting. The data will be loaded from the
DVR and the window will become active.
1
Row 7
Row 8
1
WEEK
Select the day for timer recording to be
carried out from the drop-down list box.
Available settings:
SUN, MON, TUE, WED, THU, FRI, SAT, DLY
DLY: The timer operates during the same
part of the day for each day of the week.
2
START/STOP
Use the spin buttons to set the start and end
times for timer recording.
3
SET (Default setting: OFF)
This sets whether recording is to be carried
out or not during the set timer period.
Available settings:
ON: Timer recording is carried out.
OFF: Timer recording is not carried out.
, or double-click the DVR name, and then follow the
2 3
If the stop time is set to an earlier
time than the start time, a "T" symbol
will be displayed and the stop time
will be set to the following day. This
operation makes it possible to set
continuous times of less than
24 hours that span different days.
<Setting example>
The timer will be set from 10 p.m. on Sunday to
6 p.m. on Monday.
4
OVER 24H
Click when timer recording is to continue for a
continuous period of more than 24 hours.
When the button is clicked, the setting format
changes. Use the last two rows (row 7 and
row 8) to make the settings.
First row (row 7): Sets the day and time for
recording to start.
Last row (row 8): Sets the day and time for
recording to stop.
44
' ' '
(User Level: ID4)
4
English