Table of Contents
Advertisement
TROUBLESHOOTING
Condition/Problem
No display/partial display/
unit will not turn on
Unit operates but Contact
HR not displayed
36
Things to Check
Check electrical (wall)
outlet
Check connection at front
(recumbent) or rear (up-
right) of unit
Check data cable integrity
Check data cable
connections/orientation
Check console display for
damage
Console Display
HR cable connection at
Console
HR cable box connection
(recumbent only)
Sensor grip
Solution
Make sure unit is plugged into a func-
tioning wall outlet.
Connection should be secure and un-
damaged. Replace adapter or connec-
tion at unit if either are damaged.
All wires in cable should be intact. If
any are visibly crimped or cut, replace
cable.
Be sure cable is connected securely
and oriented properly. Small latch on
connector should line up and snap into
place.
Check for visual sign that console dis-
play is cracked or otherwise damaged.
Replace Console if damaged.
If Console only has partial display and
all connections are fine, replace the
Console.
If the above steps do not resolve the
problem, contact Customer Care for
further assistance.
Be sure cable is connected securely to
Console.
Be sure cables from handlebars and
cable to Console are secure and un-
damaged. Some models may require
the seat back be raised to access cable
box.
Be sure hands are centered on HR
sensors. Hands must be kept still with
relatively equal pressure applied to each
side.
Hide quick links:
Advertisement
Table of Contents
