Schwinn 20 Series Bike Assembly Manual page 13

Step 6: Attach Cushions
Parts:
• #4 - Support Frame (Qty 1)
• #7 - Saddle (Qty 1)
• #8 - Back Cushion (Qty 1)
• #20 - Phillips Screw (Qty 8)
Tools:
• Phillips Screw Driver
Assembly Steps
6-1: Install Saddle (7) and Back Cushion (8) onto the
7
Figure 6
13
Assembly Manual
Saddle Support Frame (4) using 8 Phillips Screws
(20). Insert the Phillips Screws through the screw
holes in the Saddle Support Frame first when
attaching the Saddle and Back Cushion.
Note: There are two groups of mounting holes
on the Back Cushion (8) so that you may
adjust the height of the back support to your
preference.
8
20
4