Schwinn 20 Series Bike Assembly Manual page 11

Step 4: Attach Rear Stabilizer Bar
Parts:
• #3 - Rear Stabilizer Bar (Qty 1)
• #5 - Rail Tube Assembly (Qty 1)
• #16 - Hex Screw (Qty 4)
• #17 - Flat Washer (Qty 4)
Tools:
• Hex key L6
Assembly Steps
5
Figure 4
4-1: Attach the Rear Stabilizer Bar (3) to the Rail Tube (5)
using 4 Hex Screws (16) and 4 Flat Washers (17).
Note: Make sure the Rear Stabilizer Bar (3) is
oriented as illustrated, with the bend in the
bar facing forward.
17
16
11
Assembly Manual
3