Contact Information - Schwinn 20 Series Bike Assembly Manual

Step 8: Install Adjustment Handle
Parts:
• #29 - Adjustment Handle (Qty 1)
• #30 - Screw (Qty 1)
29
Figure 8
Figure 8A
Assembly Steps
A
30
Cam retainer
8-1: Insert the Adjustment Handle (29) into the handle
mount (see Detail A). Finish install by tightening
Screw (30).
Note: Do not overtighten and strip the threads on
the screw (30).
8-2: Remove cam retainer by cutting tie strap, and dis-
card. See Figure 8A.
Handle
29
mount
29
(side view)
15
Assembly Manual
30
Detail A