Schwinn 20 Series Bike Assembly Manual page 12

Step 5: Attach Handlebar to Saddle Support Frame
Parts:
• #4 - Saddle Support Frame (Qty 1)
• #6 - Handlebar (Qty 1)
• #17 - Flat Washer (Qty 4)
• #26 - Hex Screws (Qty 4)
• #23 - Middle Pulse Wire (Qty 1)
• #25 - Handlebar Wire Connector (Qty 1)
Tools:
• Hex key L6
Figure 5
Assembly Steps
23
25
Figure 5 A
12
Assembly Manual
5-1: Attach the Handlebar (6) to Saddle Support Frame
(4) using 4 Hex Screws (26) and 4 Flat Washers (17)
as shown in Figure 5.
5-2: Connect Handlebar Wire Connector (25) to Middle
Pulse Wire (23) as shown in Figure 5A. Do not
pinch the Handlebar Wire Connector (25) during
assembly
6
26
17
25
4
23