Assembly - ProForm 525 User Manual

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the parts
used in assembly. Assembly requires the included allen wrench
and an adjustable spanner
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
If further assistance is needed, please call our Customer Service Department at 08457 089 009.
Latch/Handrail Screw (81)–4
WARNING:
cord until the treadmill is completely assembled.
1. With the help of a second person, carefully raise the
Uprights (11) until the treadmill is in the position shown.
2. Insert one of the Extension Legs (34) into the treadmill as
shown. (Note: It may be helpful to tip the Uprights [11] in
the direction shown by the arrow as you insert the
Extension Leg.) Make sure that the Base Pad (40) is on
the indicated side of the Extension Leg. Attach the
Extension Leg with an Extension Leg Screw (53). Make
sure to push on the head of the Extension Leg Screw
whilst tightening it.
Next, attach the other Extension Leg (34) in the same way.
.
Handrail Bolt (88)–2
Do not plug in the power
, a Phillips screwdriver
Extension Leg Screw (53)–2
Washer (39)–2
1
2
,
11
11
53
34
40