Selecting Audio Signal Types For The Digital Output - Grundig XENARO GDP 5100 User Manual

USING EXTERNAL DEVICES
Sound
1 Surround sound
2 Extended settings
select exit
and choose
back
Extended settings
1 Digital
2 Analog
select exit
and choose
back
Output format
Original
1 DOLBY
2 MPEG Original
3 PCM Original
select exit
and choose
back
Bits
16
20
24
select
and choose
Adapting the digital output to a digital multi-channel
amplifier
With this you choose whether the decoder signal is processed in the unit or fed
unchanged to the digital output. With internal decoding, there is a stereo signal
(PCM) at the digital output.
1
Press »i« to call up the main menu.
2
Select the »Sound« menu with »
select directly with
3
Select the »Extended settings« line with »
»OK«.
4
Select the » Digital« line with »
Note:
For further operation, see the following sections, each one starting from
Step 1.

Selecting audio signal types for the digital output

The audio signal type must be selected according to the connected
decoder/amplifier.
1
Select the »Output format« line with »
2
Select the required output format, (»DOLBY« »MPEG«, or »PCM«) with
» « or »
S A
3
Select the audio signal type (»Original« or »PCM«) with »
then press »OK« to confirm.
4
Return to the »Digital« menu by pressing »x«.
Setting the bit rate
Here you choose the possible digital resolution and the dynamic range possible
of the output signal in order to adapt the signal to the decoder.
1
Select the » Bits« line with »
2
Select the desired value (»16«, »20« or »24«) with »
press »OK« to confirm.
_____________________________________________________
« or »
S
»1 ...
0«.
« or »
S
S
« and confirm with »OK«.
« or »
S A
« activate with »OK«, or
A
« or » « and activate with
S A
« and activate with »OK«.
A
« or » « and activate with »OK«.
A
« or »
S
« and activate with »OK«.
« or »
S
« and
A
« and
A
31