Grundig XENARO GDP 5100 User Manual page 33

USING EXTERNAL DEVICES
Extended settings
1 Digital
2 Analog
select exit
and choose
back
Analog
0 dB
1 Output level
2 Downmix mode Dolby Pro Logic
select exit
and choose
back
Downmix mode
Stereo
Surround Sound
Dolby Pro Logic
select
and choose
Adapting the analogue ouput to the HiFi system
With this you set the output level of the audio signal and the audio operation
type (stereo, surround sound or Dolby Pro Logic).
1
Press »i« to call up the main menu.
2
Select the »Sound« menu with »
select directly using
3 Select the » Extended settings« line with »
»OK«.
4
Select the » Analog« line with »
Note:
For further operation, see the following sections, each one starting from
Step 1.
Setting the ouput level
1
Select the »Output level« line with »
2
Change the output level set by step (from » 0dB« to » 20dB«) with »
» «, or with »
A
firm.
Selecting the audio mode
1
Select the » Downmix mode« line with »
»OK«.
2
Select the desired mode (» Stereo«, » Surround Sound« or » Dolby Pro
Logic«) with »
3
Press »i« to leave the menu.
_____________________________________________________
« or »
S
»1 ...
0«.
« or »
S
« or »
S
« and » « in increments of 10, and press »OK« to con-
a s
« or » « and press »OK« to confirm.
S A
« activate with »OK« or
A
« or » « and activate with
S A
« and activate with »OK«.
A
« and activate with »OK«.
A
« or » « and activate with
S A
« or
S
33