Audio Settings; Selecting The Digital Output; Setting The Sampling Rate - Grundig GDP 1100 User Manual

AUDIO SETTINGS

Installation Picture Sound Child lock
Digital Output PCM PCM
Clock rate 96kHz Original
Installation Picture Sound Clock rate
Digital Output PCM
Clock rate 96kHz 96kHz
48kHz

Selecting the digital output

Here you select whether the audio signal is emitted from the
OUT« sockets in the original data format or in PCM format. The factory setting
is »PCM«.
1
Call up the main menu using »SETUP«.
2 Select the »Sound« menu item with
»ENTER«.
3
Select » Digital Output« with »S« or »A« and activate with »ENTER«.
4
Select the desired operating type with (» PCM« or » Original«) with »S« or
»A« and confirm with »ENTER«.
5
Press »SETUP« to conclude the setting.

Setting the sampling rate

This setting is used to adjust the sampling rate of the digital output. The sampling
rate indicates how many samples can be read in per time interval.
– Use »96 kHz« for DVDs with a 96 kHz audio signal for optimum analogue
audio output at the
factory.
– Use »48 kHz« for DVDs with a 48 kHz audio signal. The signal is emitted at
the »R AUDIO OUT
1 Call up the main menu using »SETUP«.
2
Select the »Sound« menu item with
»ENTER«.
3
Select » Clock rate « with »S« or »A« and activate with »ENTER«.
4
Select the desired value using (»48 kHz« or »96 kHz«) with »S« or »A«
and confirm with »ENTER«.
5
Press »SETUP« to conclude the setting.
_______________________________________________________
»a « or »s« and activate it with
»R AUDIO OUT L« sockets. »96 kHz« is preset at the
L« and »DIGITAL AUDIO
»a « or »s« and activate it with
»DIGITAL AUDIO
OUT« sockets.
33