Connecting To A Hifi System With Analog Two-Channel Stereo Sound; Connecting The Power Cord; Inserting Batteries In The Remote Control - Grundig XENARO GDP 5100 User Manual

10
CONNECTION AND PREPARATION
Connecting to a HiFi system with analogue two-
channel stereo sound
As an alternative to using the television's speakers, the sound can also be played
back through a HiFi system.
R L
AUDIO
INPUT
1 Plug a standard cinch cable into the
DVD player and into the appropriate sockets on the HiFi system.
Caution:
Do not connect the DVD player's
PHONO sockets (record player input) on the HiFi system.

Connecting the power cord

1 Plug the power cord supplied into the
of the the DVD player.
2 Insert the power cord plug into the socket.
Caution:
The only way to disconnect the DVD player from the mains supply is to pull
the plug.

Inserting batteries in the remote control

1
Open the battery compartment by pressing the snap-catch, and remove the
lid.
2
When inserting the batteries (mignon type, for example, LR 6 or AA
2 x 1.5 V), observe the polarity marked on the battery compartment.
Note:
If the DVD player no longer reacts properly to remote control commands, the
batteries may be flat. Always remove flat batteries. No liability is accepted
for damage resulting from leaking batteries.
Environmental note:
Batteries, including those which are heavy metal-free, may not be disposed
of with household waste. Please dispose of used batteries in an environ-
mentally sound manner. Find out about the legal regulations which apply in
your area.
_______________________________________
»AUDIO OUT L R« sockets on the
»AUDIO OUT L R« sockets to the
~
»220-240V « socket on the back