Setting The Sampling Rate - Grundig XENARO GDP 5100 User Manual

Clock rate
Original
96 kHz
48 kHz
select
and choose
Digital
1 Output format
24
2 Bits
3 Clock rate Original
4 Output level 0 dB
select exit
and choose
back
32
USING EXTERNAL DEVICES

Setting the sampling rate.

This function is used to limit the sampling rate of the digital multi-channel ampli-
fier.
1
Select the » Abtastrate« line with »
the function.
– This has been set to »48 kHz« at the factory.
2 Select the desired value (»Original«, »96 kHz« or »48 kHz«) with »
»
A
– Use »Original« for DVDs with a 96 kHz sound signal.
The sound signal is output at the
supported by the DVD – at the
– Use »96 kHz« for DVDs with a 96 kHz sound signal for optimum analogue
sound output at the
»DIGITAL AUDIO
– Use »48 kHz« for DVDs with a 48 kHz sound signal.
The signal is output at the
TAL AUDIO
48 kHz.
Setting the digital output level
With this setting, the output level can be adapted to the volume of other external
sound sources.
1 Select the »Output level« line with »
2
Change the output level set by step (from »0dB« to »20 dB«) with »
»
A
3 Press »i« to quit the menu.
_____________________________________________________
« and confirm with »OK«.
»AUDIO OUT L
OUT« socket.
»AUDIO OUT L
OUT« socket. THE 96 kHz sound signal is converted into
«, or with » « and » « in 10 steps, and press »OK« to confirm.
a s
« or » « and press »OK« to activate
S A
»AUDIO OUT L R« sockets and – if
»DIGITAL AUDIO OUT« socket.
R« sockets. No sound signal at the
R« socket and at the
« or » « and activate with »OK«.
S A
« or
S
»DIGI-
« or
S