Audio Settings; Selecting The Digital Output; Switching The Dynamic Range (Volume Range) On And Off - Grundig GDP 1750 User Manual

36

AUDIO SETTINGS

Selecting the digital output

Here you select whether the audio signal is emitted from the
»DIGITAL AUDIO
PCM format.
1 Press »i« to open the main menu.
2
Select »Sound« with »
✓
s
or »
3 Select » Digital Output« by pressing »
vate by pressing »OK«.
4 Select the operating mode (»Original« or »PCM«) by pressing
S
»
5 Press »i« to close the menu.
Switching the dynamic range (volume range) on
and off
Dolby digital soundtracks have a very large dynamic volume
range, hence there is a great difference in volume between quiet
and loud tones. When played at high volume this can be a fasci-
nating experience, which may however cause disturbance late at
night.
Simply reducing the volume does not produce pleasing results, and
the dialogue becomes difficult to understand. You need to turn
down the louder sounds and turn up the quieter passages, while re-
taining the volume of the dialogue.
1 Press »i« to open the main menu.
2 Select »Sound« with »
✓
s
or »
3 Select » Night Mode« by pressing »
vate by pressing »OK«.
4 Select the function by pressing »
press »OK« to confirm.
5 Press »i« to close the menu.
OUT« socket in the original data format or in
S
« or »
«.
A
« or » « and confirm with »OK«.
S
« or »
«.
________________________________
A
« and activate with »OK«
S A
« or »
A
« and activate with »OK«
S A
« or »
S A
« or » « (»On«) and
« and acti-
« and acti-