Displaying Tv Information; Changing Tv Channels - Daewoo DR-2100P Instruction Manual

DW-Q73D2P-SA(GB) 2005.9.2 9:30 AM

Displaying TV Information

While watching TV, press [DISPLAY] to display/remove the on-screen display.
If no rewritable DVD disc is inserted, you would see a screen like the following:
If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the
first button press. If you press [DISPLAY] again then the TV information is
displayed.
Changing the TV Audio Channel
You can change the TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO Audio Signal :
• MONO Audio Signal :
• BIL Audio Signal :
BIL1
The current audio channel is displayed on-screen.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.

Changing TV Channels

If no disc is playing, you can change TV channels using the [0-9] or [PR+/-] buttons on the remote control or
[PR+/–] buttons on the front panel.
˘ ` 31 mac001
Stereo Mono Stereo
Mono
BIL2 BIL1
1200DPI 90LPI
On-Screen Display Overview
PR 1 : - - - -
STEREO
PDC
12:30
SP
31