Displaying Tv Information; Changing Tv Channels - Daewoo DVR07 User Manual

DW-Q74D2N-LS(GB)USA 2005.9.21 3:21 PM

Displaying TV Information

While watching TV, press [DISPLAY] to display/remove the on-screen display.
If no rewritable DVD disc is inserted, you would see a screen like the following:
If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the
first button press. If you press [DISPLAY] again then the TV information is
displayed.
Changing the TV Audio Channel
Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the
TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO+SAP Audio Signal :
• STEREO Audio Signal :
• SAP Audio Signal :
Mono
• MONO Audio Signal :
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.

Changing TV Channels

If no disc is playing, you can change TV channels using the [0-9] or [CH +/-] buttons on the remote control or [CH
.../†] buttons on the front panel.
Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.
30
˘ ` 30 mac001
Stereo Mono SAP
Stereo Mono Stereo
SAP Mono
Mono
1200DPI 90LPI
On-Screen Display Overview
CH-6
Stereo
DVD-Video
02:26 AM
STOP