Information On The Tv Screen; Playback - Daewoo DQR-1000D Owner's Manual

Information on the TV screen

Information on the TV screen
Icons in the menu bar
You can check and change many of the features and settings on your DVD recorder using the system menu. The
menu bar cannot be displayed during recording.
Use the [SYSTEM MENU] button to call up and close the menu bar (main menu). You can select the appropriate
feature using [...] and [†]. You confirm a feature using [√]. This takes you to a submenu or executes the
feature immediately. Depending on the current disc, some features may not be available.
Picture
User preferences
--
Title/Track
---
Chapter/Index
Audio language
off
Subtitle language
no
Camera angle
Zoom off
Sound st
Search by time
22
Sound Features Installation
Language Record Settings
Status box
The status box displays the current operating mode (status) of the DVD recorder and the current disc type. This
display can be switched off.
Operating mode icons
....... No disc
....... Closing tray
....... Disc in
....... Search forwards (8x speed)
....... Loading
....... Opening
....... Opened
....... Pause play
Tuner info box
This box appears in the lower left-hand corner of the screen. The aerial signal, the TV channel and name of the
TV channel are shown.
...... Current channel/selected input socket
....... No signal : TV channel is not available/additional device is not connected
or is switched off
....... Copy protected signal
Timer information box
This box appears above the tuner information box. When a timer recording is set, it shows the timer icon and the
start time or date of the first programme to be recorded. If no timer recording is scheduled, the current time is
displayed. This box disappears during playback of a disc or after a recording starts.
.......
.......
.......
Information on the TV screen
....... Play
....... Record
....... Record pause
....... Search backwards (8x speed)
....... Backward Slow motion
....... Forward Slow motion
....... Stop
Current time : No timer event programmed
Timer starts on the day shown
OTR recording runs until the stop time displayed
23