Displaying Tv Information; Changing Tv Channels - Daewoo DRV-4705B Instruction Manual

DW-R77D1D-JB-I(GB) 2008.4.11 1:53 PM

Displaying TV Information

While watching TV, press [DISPLAY] to display/remove the on-screen display.
If no DVD disc is inserted, you would see a screen like the following:
If any DVD disc is inserted, the disc information is displayed at the second
button press.
If you press [DISPLAY] again then the TV information is displayed.
Changing the TV Audio Channel
You can change the TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO Audio Signal :
• MONO Audio Signal :
• BIL Audio Signal :
The current audio channel is displayed on-screen.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.

Changing TV Channels

If no disc is playing, you can change TV channels using the [0-9] or [PR+/-] buttons on the remote control or
[PR+/–] buttons on the front panel.
˘ ` 35 mac001
Stereo Mono Stereo
Mono
BIL1 BIL2 BIL1
1200DPI 90LPI
On-Screen Display Overview
PR 01 : 12 12:30 MONO SP
35