Table of Contents
Advertisement
Charger installation
1. Plug the small end
of the smaller power
adapter into the jack
on the underside of the
charger, then route the
cord through the slot
as shown.
IMPORTANT INFORMATION
.
Use only the power adapter supplied with this product. To order a replacement power adapter,
visit our website at
1 (800) 222-3111
2. The power adapters are intended to be correctly oriented in a vertical or floor mount position.
The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-
table or cabinet outlet.
www.telephones.att.com
.
In Canada, dial
,
or call
1 (866) 288-4268
2. Plug the large end
of the smaller power
adapter into a power
outlet not controlled by a
wall switch.
.
Advertisement
Table of Contents
