Chapter 4 Installation - Bosch VideoJet 8008 Installation And Operating Manual

VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual
Installation
VideoJet 8008 and VideoJet 8004 are designed as desktop units and intended
for installation in a switch cabinet. Mounting in a 19-inch rack using the mounting
kit supplied is a quick and easy operation.
For desktop operation, four self-adhesive, non-slip rubber feet are included,
which you can stick to the bottom of the unit.
Caution
The unit is designed for indoor operation. Select a suitable location for in-
stallation where the unit will not be subjected to conditions of extreme tem-
perature or humidity. The ambient temperature must be between 0 and
+40 °C (+32 and +104 °F), and the relative humidity must not exceed 80%
(non-condensing).
The unit heats up during operation, so you should ensure that there is ad-
equate ventilation and enough clearance between the unit and heat-sen-
sitive objects or equipment.
Please ensure the following installation conditions:
Do not install the unit close to heaters or other heat sources. Avoid locations
exposed to direct sunlight.
Allow sufficient space for running cables.
Ensure that the unit has adequate ventilation. Bear the total heat output in
mind, particularly when installing multiple units in a switch cabinet.
When making connections, use only the cables supplied or use appropriate
cables immune to electromagnetic interference.
Position and run all cables so that they are protected from damage, and pro-
vide adequate cable strain relief where needed.
Avoid impacts, blows and severe vibrations as these can irreparably damage
the unit.
Bosch Security Systems | 2006-07 | V1.5
EN | 17
4
Installation