Connections - Bosch VideoJet 8008 Installation And Operating Manual

EN | 20

Connections

Cameras
You can connect a maximum of eight standard video sources (such as CCTV
cameras). Any cameras and other video sources that produce a standard PAL
or NTSC signal are suitable.
Note
On the VideoJet 8008, the maximum resolution at the complete image rate
for each camera input is Full D1/4CIF. The VideoJet 8004 only supports
the Full D1/4CIF resolution when every other camera input is assigned,
that is, when the four uneven inputs (Video 1, 3, 5, 7) or the four even in-
puts (Video 2, 4, 6, 8) are assigned. If all eight inputs are assigned, the
VideoJet 8004 supports a maximum resolution of 2CIF at the full image
rate. Mixed assignment is also possible: for example, assign Video 1 to
Video 4 (2CIF) and then only Video 5 and Video 7 (4CIF each).
VideoJet 8008
VideoJet 8004
– Connect the cameras or other video sources with a video cable
(75 Ohm, BNC plug) to the BNC Video 1 to Video 8 sockets.
– Set the 75 Ω sliding switch under the BNC sockets to , in order to terminate
the video input, if the video signal is not looped through.
Installation
Installation and Operating Manual | VideoJet 8008 / VideoJet 8004
Video 1 Video 2 Video 3 Video 4 Video 5 Video 6 Video 7 Video 8
4CIF 4CIF
Video 1 Video 2 Video 3 Video 4 Video 5 Video 6 Video 7 Video 8
4CIF —
— 4CIF
2CIF 2CIF
2CIF 2CIF
4CIF 4CIF 4CIF
4CIF — 4CIF
— 4CIF
2CIF 2CIF 2CIF
2CIF 2CIF 4CIF
4CIF 4CIF
— 4CIF
— 4CIF —
2CIF 2CIF
— 4CIF
Bosch Security Systems | 2006-07 | V1.5
4CIF
—
4CIF
2CIF
—