Hardware Connections Between Video Servers - Bosch VideoJet 8008 Installation And Operating Manual

EN | 132

Hardware connections between video servers

You can easily connect a VideoJet 8008 or VideoJet 8004 with connected cam-
eras as a sender, and a suitable MPEG-4 compatible hardware decoder (such
as the VIP XD) with a connected monitor as a receiver via an Ethernet network
connection. In this way it is possible to cover long distances without the need for
major installation or cabling work.
Installation
Compatible video servers are designed to connect to one another automatically,
provided they are correctly configured. They only need to be part of a closed net-
work. Proceed as follows to install the units:
– Connect the units to the closed network using Ethernet cables.
– Connect them to the power supply.
Note
Make sure that the units are configured for the network environment and
that the correct IP address for the remote location to be contacted in the
event of an alarm is set on the Alarm connections configuration page
(see pages 53 and 97).
Connecting
There are three options for establishing a connection between a sender and a
compatible receiver in a closed network:
an alarm,
a terminal program or
a Web browser.
Operation
Installation and Operating Manual | VideoJet 8008 / VideoJet 8004
Bosch Security Systems | 2006-07 | V1.5