Hardware Connections Between Video Servers - Bosch VIP X1600 M4S Installation And Operating Manual

Encoder module
Table of Contents

Advertisement

98
en | Operation
6.8

Hardware Connections Between Video Servers

You can easily connect a VIP X1600 M4S encoder module with cameras connected to it, acting
as a sender, to a compatible hardware decoder (such as the VIP XD) with a connected
monitor, acting as a receiver, via an Ethernet network. In this way it is possible to cover long
distances without the need for major installation or cabling work.
NOTICE!
i
The sender and receiver must be located in the same subnet to establish a hardware
connection.
Installation
Compatible video servers are designed to connect to one another automatically, provided
they are correctly configured. They only need to be part of a closed network. Proceed as
follows to install the units:
1.
2.
NOTICE!
Make sure that the units are configured for the network environment and that the correct IP
i
address for the remote location to be contacted in the event of an alarm is set on the Alarm
Connections configuration page (see Section 5.26 Advanced Mode: Alarm Connections,
page 56).
Connecting
There are three options for establishing a connection between a sender and a compatible
receiver in a closed network:
NOTICE!
i
Connecting with a Web browser is described in the manual of the relevant unit that is to be
used as the receiver, for example VIP XD.
Connecting on Alarm
With the appropriate configuration, a connection between a sender and a receiver is made
automatically when an alarm is triggered (see Section 5.26 Advanced Mode: Alarm Connections,
page 56). After a short time the live video image from the sender appears on the connected
monitor.
This option can also be used to connect a sender and a compatible receiver using a switch
connected to the alarm input. You do not need a computer to make the connection in this
case.
DOC | V4.0 | 2009.06
Connect the units to the closed network using Ethernet cables.
Connect them to the power supply.
an alarm,
a terminal program, or
Internet Explorer.
Installation and Operating Manual
VIP X1600 M4S
Bosch Security Systems

Advertisement

Table of Contents
loading

Table of Contents