Visual Eq Operation - Alpine PKG-1000P Owner's Manual

VISUAL EQ Operation

You can select a mode suitable for the subject image.
• Each source can be adjustable individually.
• Adjusting should be made within 10 seconds,
otherwise OSD (On Screen Display) will be
automatically turned off.
DIMMER
1
Press and hold DIMMER for at least 2
seconds to show the VISUAL EQ OSD.
2
To change VISUAL EQ, press DIMMER or
▲ ▼
press or to cycle through the OSD as
FLAT, NIGHT MOVIE, SOFT, SHARP, HIGHT
CONT, and FLAT. (Default: SHARP)
VISUAL EQ mode (manufacturer's settings) selection
(VISUAL EQ MODE)
FLAT: Normal Setting (Visual EQ OFF)
NIGHT MOVIE: Suitable for movies in which dark
scenes frequently appear.
SOFT: Suitable for CGs and animated
fi lms.
SHARP: Suitable for old movies where
images are not clearly shown.
CONTRAST: Suitable for recent movies.
• "FLAT" will change to "CUSTOM", when any of the
picture mode (Brightness, Color, Tint, Contrast and
Sharpness) has been adjusted
• NIGHT MOVIE, SOFT, SHARP and CONTRAST
are fi xed values. They cannot be set manually. If the
picture mode is changed, they automatically change to
CUSTOM mode.
• To return FLAT mode, press RESET on the picture
mode, or change values of BRIGHT, COLOR, TINT,
CONTRAST and SHARPNESS to 0 manually.
8
-EN
PKG-1000P_EN.indd EN8 PKG-1000P_EN.indd EN8
3
Press ENT to fi nish adjustments or wait
10 seconds until OSD disappears; the
adjustment will be saved automatically.
Front Panel Controls
DIMMER
Remote Control
5/17/2005 1:39:50 PM 5/17/2005 1:39:50 PM