Advertisement
Quick Links
Honda Civic
PSU-300CVC Sound System Upgrade
Installation Manual
˜ Model: Sedan LX, EX, EX-T, EX-L*
˜ Model Year: 2016 – UP
*Not compatible with factory amplified systems
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin, remove the ground wire from the NEGATIVE (-)
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.
Introduction
˜ Congratulations on purchasing the PSU-300CVC. This installation manual is designed to take you through the
step-by-step installation of the PSU-300CVC into a 2016 - UP Honda Civic. Please familiarize yourself with the
owner's manual and if you still have additional questions please call 1-800-TECH-101.
Note
˜ Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
˜ The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
˜ Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
˜ This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Ignoring the content marked by this indication and using the product incorrectly may
Warning
lead to death or serious injury.
Ignoring the content marked by this indication and using the product incorrectly may
Caution
lead to injury or property damage.
Model
Honda
Civic
Honda Civic
˜ 1/11
Year
2016 – UP
Advertisement
Related Manuals for Alpine PSU-300CVC
Summary of Contents for Alpine PSU-300CVC
- Page 1 ˜ Congratulations on purchasing the PSU-300CVC. This installation manual is designed to take you through the step-by-step installation of the PSU-300CVC into a 2016 - UP Honda Civic. Please familiarize yourself with the owner’s manual and if you still have additional questions please call 1-800-TECH-101.
- Page 2 The installation and wiring of this steering wheel, gearshift, or the like; or product requires specialized skills and pose a threat to passengers. Doing so experience. Have the product installed by could lead to an accident or injury. an Alpine authorized dealer.
- Page 3 Honda Civic ˜ 3/11 Tools Required Panel Removal Tool Sockets Phillips Screwdriver 8mm 10mm Wire Cutters Extension Ratchet T50 Torx Cordless Power Drill Cordless Impact Gun Accessory List Amplifier Assembly T-Harness Main Harness (10) Cable Ties RCA Adapters Power Cable Lock Washers ½”...
- Page 4 Honda Civic ˜ 4/11 Factory Equipment Removal Process Using a panel removal tool release the clips and Remove the HVAC control panel by pulling towards remove both right and left side covers on the center the back of the vehicle. console.
-
Page 5: Installation
Honda Civic ˜ 5/11 Factory Equipment Removal Process (continued) Release the glove box compartment by pressing Using a T50 Torx socket extract (4) Torx screws both Right and Left side tabs towards each other. from the passenger side seat. Tilt the passenger seat towards the back to reveal (4) connectors. - Page 6 Honda Civic ˜ 6/11 Installation (continued) Mount the subwoofer level remote with the provided Connect the power cable to the main harness. hook and loop adhesive tape in the center console compartment as shown below. Route the cable to the passenger side seat. Lift the carpet near the front left screw of the Connect the main harness and subwoofer level passenger side seat mounting area and remove any...
- Page 7 Honda Civic ˜ 7/11 Installation (continued) Connect the T-harness and main harness to Use cable ties to secure any excess wiring and the radio. Refer to pages 8,9 or 10 for the return all removed component to their location. corresponding system wiring diagram. Connect the Negative (-) battery terminal.
- Page 8 Honda Civic ˜ 8/11 OEM Head Unit Wiring Diagram To Vehicle Connectors TO OEM HEAD UNIT Power/Speaker 24-pin Gray Connector OEM T-HARNESS ADAPTER Front Rear Subwoofer Front Speakers 4-PIN WHITE CONNECTOR Rear Speakers 4 PIN BLACK CONNECTOR BROWN/ORANGE BLACK Ampli er Speaker Wiring To Chassis CH 1 - White (+) White/Black (-) Ground...
- Page 9 Honda Civic ˜ 9/11 Aftermarket Head Unit Wiring Diagram To Vehicle Connectors * Wire Harness and Interface sold separately To 3rd party wire harness and radio replacement interface Power/Speaker 24-pin Gray Connector OEM T-HARNESS ADAPTER Front Rear Subwoofer Front Speaker 4-PIN WHITE CONNECTOR Connect to aftermarket High Level Out...
- Page 10 Red RCA Adapter BLACK To Chassis Ground To Battery Cable For a detailed Alpine Restyle head unit wiring diagram refer to it’s corresponding installation manual. KTP-445U HEAD UNIT POWER PACK Ampli er Speaker Wiring CH 1 - White (+) White/Black (-) To Vehicle’s Battery POSITIVE (+) Terminal...
-
Page 11: Troubleshooting Guide
Honda Civic ˜ 11/11 Troubleshooting Guide Symptom Possible Cause Remedy System will not turn on Missing or blown fuse at the battery Insert or replace fuse Radio’s Remote Turn-On wire may be Verify that Remote Turn-On wire is disconnected. connected. Volume is too loud with Speaker level out is connected at the Ensure that the low level RCA adapters are...