Visual Eq; Visual Eq Setting Operation; Adjusting Image Brilliance (Live Contrast); Selecting The Visual Eq Mode (Factory's Setting) - Alpine IVA-D800R Owner's Manual

Visual EQ™

Visual EQ Setting Operation

The following steps 1 to 4 are common operations to each
"Setting item" of Visual EQ setting. Refer to each section for
details
1
After steps 1 and 2 in "Display Setup Operation"
(page 41) have been performed, touch the title bar of
Visual EQ.
Visual EQ screen appears.
2
Select a desired setting item by touching [ ] or [ ].
Setting items:
Live Contrast* Visual EQ*
Contrast Sharp* User Memory*
* The setting is available in the visual source mode. (except navigation
screen)
3
Change the setting on the selected item by touching
its [ ] or [ ].
4
Touch [ ] to return to the previous screen.
• Touching [Exit] will turn off the Display Setup screen, and return to
previous main screen.
• Only one setting item can be displayed on each page, you can select
the desired brightness, picture tint, etc. through the screen shown.

Adjusting Image Brilliance (Live Contrast)

The over brightness/darkness part of image will be adjusted to a proper
brilliance automatically.
Setting item: Live Contrast
Setting contents: OFF / Low / High
• You can adjust this setting in visual source mode by touching [
directly. (In this case, the "Live Contrast" is displayed as
"Contrast".)
Bright Color* Tint*
]
Selecting the Visual EQ Mode (Factory's
setting)
You can select a mode suitable for the subject image.
Setting item: Visual EQ
Setting contents: OFF (FLAT) / Night M. / Soft / Sharp / Contrast /
P-1 / P-2
OFF (FLAT): Initial Setting
Night M.: Suitable for movies in which dark scenes
frequently appear.
Soft: Suitable for CGs and animated films.
Sharp: Suitable for old movies where images are not
clearly shown.
Contrast: Suitable for recent movies.
P-1: Recalls the Visual EQ mode being stored on
preset No.P-1 from "Storing Visual EQ" (page 44).
P-2: Recalls the Visual EQ mode being saved on
preset No.P-2 from "Storing Visual EQ" (page 44).
• To return to the initial setting, after selecting any one of the setting
contents (Night M. to Contrast) and adjusting a desired brightness,
picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (Night M. to Contrast),
"Custom" is displayed.

Adjusting Brightness

Setting item: Bright
Setting content: –15 ~ +15
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows "MIN" or "MAX" respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car's interior lighting as
long as Auto is set in "Setting the Brightness of the Backlighting"
(page 42).

Adjusting Colour of Picture

Setting item: Color
Setting content: -15 ~ +15
You can adjust the colour between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
• Colour adjustment can be made only in the iPod video, DVD, Video
CD, AUX modes.
• Colour adjustment cannot be made if a Navigation system with the
RGB feature is connected.
43
-EN