Tmc Operation; Automatic Seek Tuning (Seek) For Receiving Tmc Stations - Alpine NVD-T334 Owner's Manual

TMC Operation

SOURCE/POWER NAV.
MENU
RTN
About the TMC indicator
: receiving TMC (common)
: not receiving TMC (if TMC tuner is
built-in)
: not receiving TMC (when TMC-001P is
connected)
Symbol
Legend
Stationary
traffic
Traffic jam
Accidents, etc.
Closed
road
Automatic Seek Tuning (SEEK) for
Receiving TMC Stations
• TMC information can be received when available by
selecting a station on this unit's built-in TMC tuner.
The optional RDS-TMC receiver box TMC-001P may
be connected.
• TMC stations are tuned to receive available TMC
information, if a built-in TMC tuner only is used.
1
Press the NAV. button to change the Audio mode.
2
Press the SOURCE/POWER button to select the Radio
mode.
22
-EN
OK/TMC MODE
Flipper switch
Symbol Legend
Road
works
Weather
Parking
3
In the FM mode, press and hold the OK/TMC button for
at least 2 seconds.
All TMC stations that can be received are tuned.
"TMC SEEK" is displayed while seeking TMC. When
TMC is received, the TMC indicator
mode display.
Notes
• If a station cannot be sought, the TMC Seek finishes.
∗
INA-N333R or INA-N333RR model only: The TMC indicator
is lit when a TMC station is received.
INA-N333RS or INA-N333RRS model only: The TMC
indicator is lit only when a received station is currently
broadcasting TMC information.
The TMC indicator that is displayed in the Navigation mode
differs from that shown in the "About the TMC indicator"
section (on the left).
4
After receiving a TMC station or TMC information,
press the NAV. button to switch the Navigation mode.
5
Press the MENU button to display "NAV. MENU."
6
Select "RDS-TMC Information" from "NAV. MENU" by
moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
7
Select "Set up RDS-TMC" from the "RDS-TMC
Information" menu by moving the Flipper switch up or
down.
Press the OK button or MODE knob to execute the
selection.
8
The display screen changes to "Set up RDS-TMC."
Press the OK button or MODE knob to execute
"Country."
9
Move the Flipper switch to select the country in which
TMC is to be received.
Tip
With Auto selected, as you enter other countries which
" "
cover TMC, the unit automatically seeks for TMC stations.
However, when you are in the Radio mode, the unit does not
seek automatically for TMC stations of a new country.
If you wish to receive non-TMC radio stations and TMC
information simultaneously, connect the (optional) RDS-
TMC receiver box, TMC-001P.
10
Press the OK button or MODE knob to set the selected
country.
11
To return to the previous screen, press the RTN button.
To return to the "NAV. MENU" screen, press the MENU
button.
∗
is lit on the audio