Tmc Operation; Automatic Seek Tuning (Seek) For Receiving Tmc Stations (Ina-N333R Only) - Alpine NVD-T003 Owner's Manual

TMC Operation

SOURCE/POWER NAV. OK/TMC MODE
MENU
RTN
About the TMC indicator
: receiving TMC (common)
: not receiving TMC (if TMC tuner is
built-in)
: not receiving TMC (when TMC-001P is
connected)
Symbol
Legend
Stationary
traffic
Traffic jam
Accidents, etc.
Closed
road
Automatic Seek Tuning (SEEK) for
Receiving TMC Stations (INA-N333R only)
• TMC station can be received if there is TMC
information by selecting a station on the INA-N333R
model's built-in TMC tuner.
The optional RDS-TMC receiver box TMC-001P may
be connected.
• TMC stations are tuned to receive available TMC
information, if a built-in TMC tuner only is used.
1
Press the NAV. button to change the Audio mode.
2
Press the SOURCE/POWER button to select the Radio
mode.
Flipper switch
Symbol Legend
Road
works
Weather
Parking
3
In the FM mode, press and hold the OK/TMC button for
at least 2 seconds.
All TMC stations that can be received are tuned.
"TMC SEEK" is displayed while seeking TMC. When
TMC is received, the TMC indicator
mode display.
Notes
• If a station cannot be sought, the TMC Seek finishes.
∗
• The TMC indicator that is displayed in the Navigation mode
differs from that shown in the "About the TMC indicator"
section (on the left).
4
After receiving a TMC station, press the NAV. button to
switch the Navigation mode.
5
Press the MENU button to display "NAV. MENU."
6
Select "RDS-TMC Information" from "NAV. MENU" by
moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
7
Select "Set up RDS-TMC" from the "RDS-TMC
Information" menu by moving the Flipper switch up or
down.
Press the OK button or MODE knob to execute the
selection.
8
The display screen changes to "Set up RDS-TMC."
Press the OK button or MODE knob to execute
"Country."
9
Move the Flipper switch to select the country in which
TMC is to be received.
10
Press the OK button or MODE knob to set the
selected country.
11
To return to the previous screen, press the RTN button.
To return to the "NAV. MENU" screen, press the MENU
button.
∗
is lit on the audio
21
-EN