Route Setting/Route Editing; Checking The Route By List; Researching; Changing The Searching Conditions - Alpine NVD-T334 Owner's Manual

Route Setting/Route Editing

OK
MENU RTN

Checking the Route by List

With this detailed list you can find the route, road name
and the distance between the points.
1
After setting the route, press the MENU button to
display "NAV. MENU."
2
Select "Edit Route" from "NAV. MENU" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "Turn List" from the "Edit Route" menu by
moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the selection.
4
The route information is displayed.
The "Turn List" scrolls by moving the Flipper switch up.
5
To return to the previous screen, press the RTN button.
To return to the "NAV. MENU" screen, press the MENU
button.

Researching

You can edit the route search conditions even after the
route calculation has been performed, and have the
system search for alternative route.
1
Press the MENU button to display "NAV. MENU."
2
Select "Edit Route" from "NAV. MENU" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "Re-route" from the "Edit Route" menu by
moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
18
-EN
MODE Flipper switch
4
The system starts to search for a new round-about
route in the vicinity of the vehicle.

Changing the Searching Conditions

Use this when you want to change the route preference
while you are driving receiving route guidance. (For
example, if the route preference is set to "Quick", and
you want to change to another route preference.)
1
Press the MENU button to display "NAV. MENU."
2
Select "Edit Route" from "NAV. MENU" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "Search Condition" from the "Edit Route" menu
by moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
4
Set your preference (Quick, Short, Alternative) from the
"Search Condition" menu.
Changing the Conditions of the
Searched Route
You can edit the route to use the motorway, ferry, etc. or
not.
1
Press the MENU button to display "NAV. MENU."
2
Select "Edit Route" from "NAV. MENU" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "Route Preference" from the "Edit Route" menu
by moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
4
Move the cursor to your desired editing item from the
"Route Preference" menu by moving the Flipper
switch up or down.
Press the OK button or MODE knob to execute the
setting of the item.
5
The displayed screen changes. Select "Allow" or
"Detour" and press the OK button or MODE knob to
execute the selection.
6
To return to the previous screen, press the RTN button.
To return to the "NAV. MENU" screen, press the MENU
button.
Note
The "Motorway Allow" setting is recommended when searching
for a long distance route.