Searching For Point Of Interest From Category - Alpine NVD-T334 Owner's Manual

Searching For Destination
OK
MENU
Searching for Point of Interest from
Category
If you know the category or name of the desired point of
interest (P.O.I.), you can easily display that point of
interest by just selecting the desired category from the
displayed category list or inputting its name.
1
Press the MENU button to display "NAV. MENU."
2
Select "Destination" from "NAV. MENU" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
3
Select "POI Category" from the "Destination" menu by
moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
4
Select the desired category from the "POI Category"
list by moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
(This section describes "Travel" as an example.)
Tip
If you select "All Categories", you do not need to select
category. Skip to Step 6.
5
Select "Airport" from the "Travel" list and press the OK
button or MODE knob to execute the selection.
6
The displayed screen changes.
Press the OK button or MODE knob to execute "City
Name Input."
If you select "Search All Cities," you do not need to
input a city name. The screen changes directly to the
POI Name inputting display.
14
-EN
MODE Flipper switch
7
The character pallet is displayed.
Move the cursor to the character to be input by moving
the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
Tips
• When one character is input, the candidates for the next
character are narrowed down (and the others disappear
from the character pallet).
• You can also search for a location by inputting just the start
of its name and selecting "LIST."
• If you want to display the list of candidate city names, select
"LIST" and press the OK button. Skip to Step 9.
8
Repeat Step 7 above to complete character input of
the city name.
9
The displayed screen changes to the city list. Select a
desired CITY and press the OK button or MODE knob
to execute the selection.
10
Repeat Step 7 above to complete character input of
the "Input POI Name."
11
The displayed screen changes to the "Select POI" list.
Select the point of interest, and then press the OK
button or MODE knob to execute the selection.
12
The displayed screen changes. Select "Start Guidance"
and press the OK button or MODE knob to execute the
selection.
The message appears and the system starts
searching for route.
Tip
Select "Detailed Information" for information about a location's
address or phone number, etc.
13
The display screen changes. Select a desired item
from "Quick", "Short" or "Alternative" by moving the
Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection. The route guidance to the destination starts.