Suspending/Restarting Voice Guidance; Calling Up The Audio Source - Alpine NVD-T334 Owner's Manual

Suspending/Restarting Voice
Guidance
1
To suspend the voice guidance, press the MENU
button to display the "NAV. MENU" screen after the
route has been calculated.
2
Select "Suspend Guidance" from "NAV. MENU" by
moving the Flipper switch up or down.
Press the OK button or MODE knob to execute the
selection.
The message appears and the voice guidance is
suspended.
3
When you want to resume the voice guidance, press
the MENU button. Select "Resume Guidance" from
"NAV. MENU" and press the OK button or MODE knob
to execute the selection.
The message appears and the voice guidance is
resumed.

Calling Up the Audio Source

1
While in the Navigation mode (except NAV. MENU
screen and each list screen), you can change over to an
audio source by pressing the SOURCE/POWER button.
In addition, you can perform operations such as calling
up a preset, switching BAND and TRACK UP/DOWN,
SETUP, bass engine, etc.
For Audio operation, refer to the INA-N333R/INA-
N333RR or INA-N333RS/INA-N333RRS of Owner's
Manual.
Main Display Mode: current mode is displayed.
Sub Display Mode: each time you switch the
source, the display mode switches.
Audio Source Volume: Displays audio source
volume, or during Voice Guidance interruption,
automatically switches to display Voice
Guidance volume.
Note
While the navigation menu is displayed, some operations do not
function.
Tip
When you are driving with route guidance, the voice and route
guidance can be interrupted at any time by pressing the NAV.
button when you switch to the audio mode.
However, when the list screen (SETUP, bass engine, etc.) is
displayed, only the voice guidance can interrupt the audio
source.
27
-EN