Removing The Access Cover - NEC Direction SP User Manual

Removing the Access Cover

The following procedure describes how to remove the
system access cover.
Turn off the computer.
1.
Disconnect the keyboard, mouse, monitor, and any other
2.
external options (such as a printer) from the rear of the
computer.
Label all cables to make reinstallation easier.
Electrostatic discharge can damage computer
components. Discharge static electricity by touching
a metal object before removing the system access
cover.
3. If the system is a minitower, lay the system down on its
right side.
4. Loosen the thumb screw at the rear of the system by
turning it counterclockwise. If you installed a lock on the
back of the system, unlock the lock and remove it.
Press the right release tab. While pressing the tab, push
down and back on the right rear of the cover. The cover
slides back about a half inch.
Press the left release tab. While pressing the tab, push
down and back on the left rear of the cover. The cover
slides back about a half inch.
5-4 Installing Options
!
CAUTION