Table of Contents
Advertisement
T
Audio
This option configures the onboard audio subsystem.
Select "Enabled" or "Disabled."
T
Legacy USB Support
This option configures support for legacy USB devices.
Select "Enabled" or "Disabled."
To return to the Advanced Menu, press
IDE Configuration Submenu
This submenu can be used to auto-configure or manually
configure the IDE devices, usually hard drives or CD-ROM
drives. Depending on the system you purchased, the
available options include "User," "Auto," "CD-ROM,"
"ATAPI Removable," "IDE Removable," or "None."
The standard hard drive (drive C) shipped with the system
is configured as "Primary IDE Master." The standard
CD-ROM reader is configured as "Secondary IDE Master."
To display the submenu for an IDE device, highlight the
appropriate device field and press
NOTE
master or slave device (see the documentation that
comes with the device).
T
IDE Controller
This option configures the system's integrated IDE
controller. Select from "Primary," "Secondary," "Both,"
or "Disabled."
4-10 System BIOS and Utilities
Jumpers on the IDE device must be set to the
.
Esc
.
Enter
Advertisement
Table of Contents
