Use a screw driver to remove the metal slot cover by
7.
carefully pressing it until it breaks away from the
chassis.
CAUTION
Be careful of sharp edges!
8.
From the front of the system, slide the device, connector
end first, into the device slot.
NOTE
To easily access device connectors for
cabling, do not insert a 5 1/4-inch device all the way
into the slot.
9.
Connect the device cables (see "Cabling Storage
Devices").
10.
Align the holes in the device with the holes in the
chassis.
Secure the device with the screws that came with the
11.
device.
Installing Options 5-33