NEC Direction SP User Manual page 181

Hide thumbs Also See for Direction SP:
Table of Contents

Advertisement

Message
Cause
Message
Cause
Solution
Message
Cause
Solution
Message
Cause
Solution
Message
Cause
Solution
C-8 System Board, Connectors, and Error Messages
Keyboard locked—Unlock key switch.
Unlock the system to proceed.
System battery is dead. Replace and run
SETUP.
The CMOS clock battery that supports the
BIOS is dead.
Replace the battery and run the Setup Utility
program to reconfigure the system.
System CMOS Checksum bad – run SETUP.
System CMOS has been corrupted or modified
incorrectly, perhaps by an application program
that changes data stored in CMOS.
Run the Setup Utility program and reconfigure
the system, either by selecting the default
values and/or by making your own selections.
Monitor type does not match CMOS – Run
SETUP.
The monitor type is not correctly identified in
the Setup program.
Run the Setup Program.
Operating System not found.
The operating system cannot be found in either
Drive A or Drive C.
Run the Setup program and make sure the
fixed disk and drive A are properly identified.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Direction sp e-series

Table of Contents