Bottom Cover Removal; Removing The Bottom Cover - NEC POWERMATE 2000 Service And Reference Manual
Pentium iii 800-mhz or higher processor-based series
Hide thumbs
Also See for POWERMATE 2000:
- Service and reference manual (183 pages) ,
- Service and reference manual (157 pages)
Table of Contents
Advertisement
Bottom Cover Removal
Remove the bottom cover from the system unit as follows.
Close all applications, shut down the operating system, turn off system power, and unplug
1.
the AC power adapter and power cord from the power source and the back of the system
unit.
Turn off and disconnect all peripherals.
2.
Carefully position the system as described earlier in this section, under
3.
"SO-DIMM Module Removal." Position the system with the LCD panel face up.
Remove eight Phillips head screws holding the bottom cover to the system unit. It is not
4.
necessary to remove the SO-DIMM panel from the cover.
Set the screws and bottom cover aside.
5.
Removing the Bottom Cover
A – Bottom Cover
B – Screw (1 of 8)
Disassembly and Reassembly 3-7
Advertisement
Table of Contents
