Changing Remote Fax Options - Brother MFC-7360 User Manual

Changing Remote Fax
Options
If received faxes are left in your machine's
memory when you change to another
Remote Fax Option, the LCD will ask you the
following message:
Erase All Doc?
1.Yes 2.No
or
Print All Fax?
1.Yes 2.No
 If you press 1, faxes in the memory will be
erased or printed before the setting
changes. If a backup copy has already
been printed it will not be printed again.
 If you press 2, faxes in the memory will not
be erased or printed and the setting will be
unchanged.
If received faxes are left in the machine's
memory when you change to PC Fax
Receive from another remote fax option
(Fax Forward or Fax Storage), the LCD
will ask you the following message:
Send Fax to PC?
1.Yes 2.No
 If you press 1, faxes in the memory will be
sent to your PC before the setting
changes.
 If you press 2, faxes in the memory will not
be erased or transferred to your PC and
the setting will be unchanged.
IMPORTANT
If you choose Backup Print On, the
4
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case if there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
(For MFC-7360)
The faxes stored in the machine's memory
will be deleted.
Turning off Remote Fax Options
a
Press Menu, 2, 5, 1.
b
Press a or b to choose Off.
Press OK.
Note
The LCD will give you options if there are
received faxes still in your machine's
memory. (See Changing Remote Fax
Options on page 23.)
c
Press Stop/Exit.
Receiving a fax
4
4
23