Enlarging Or Reducing The Image Copied; Making N In 1 Copies - Brother MFC-7360 User Manual

Chapter 7
Enlarging or reducing the
image copied
You can choose the following enlargement or
reduction ratios.
To enlarge or reduce the next copy follow the
instructions below:
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Options.
Press a or b to choose Enlarge/Reduce.
Press OK.
e
Do one of the following:
 Press a or b to choose the
enlargement or reduction ratio you
want.
Press OK.
 Press a or b to choose Custom(25-
400%).
Press OK.
Use the dial pad to enter an
enlargement or reduction ratio from
25% to 400%. (For example, press
5 3 to enter 53%.)
Press OK.
f
Press Start.
Note
• Page Layout Options 2 in 1 (P), 2 in 1 (L),
2 in 1 (ID), 4 in 1 (P) and 4 in 1 (L) are not
available with Enlarge/Reduce.
• (P) means Portrait and (L) means
Landscape.
48

Making N in 1 copies

(page layout)
7
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page. If you want to copy
both sides of an ID card onto one page, see 2
in 1 ID Copy on page 50.
.
IMPORTANT
• Please make sure the paper size is set to
A4 or Letter.
• (P) means Portrait and (L) means
Landscape.
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Options.
Press a or b to choose Page Layout.
Press OK.
e
Press a or b to choose 2 in 1 (P), 2
in 1 (L), 2 in 1 (ID)
(P), 4 in 1 (L) or Off(1 in 1).
Press OK.
1
For details about 2 in 1 (ID), see 2 in 1 ID
Copy on page 50.
f
Press Start to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to step g.
7
.
1
, 4 in 1