Additional Dialling Operations; Combining Quick Dial Numbers; Additional Ways To Store Numbers; Setting Up Groups For Broadcasting - Brother MFC-7360 User Manual

Additional dialling
operations
Combining quick dial
numbers
You can combine more than one Quick Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate from another long distance
carrier.
For example, you might have stored '555' on
Speed Dial #003 and '7000' on Speed Dial
#002. You can use them both to dial
'555-7000' if you press the following keys:
Press (Address Book) 003.
Press (Address Book) 002 and Start.
Numbers can be added manually by entering
them on the dial pad:
Press (Address Book) 003, 7001 (on the
dial pad), and Start.
This would dial '555–7001'. You can also add
a pause by pressing Redial/Pause key.
Dialling and storing numbers
Additional ways to
store numbers
5
Setting up Groups for
Broadcasting
5
If you often want to send the same fax
message to many fax numbers you can set
up a Group.
Groups are stored to a One Touch key or a
Speed Dial number. Each Group uses up a
One Touch key or a Speed Dial location. You
can then send the fax message to all the
numbers stored in a Group just by pressing a
One Touch key or entering a Speed Dial
number, and then pressing Start.
Before you can add numbers to a Group, you
need to store them as One Touch or Speed
Dial numbers. You can have up to 8 small
Groups, or you can assign up to 207 numbers
to one large Group.
a
Press Menu, 2, 3, 3.
Address Book
3.Setup Groups
b
Choose the One Touch key or Speed
Dial location where you want to store the
Group.
 Press a One Touch key.
 Press
enter the three-digit Speed Dial
location.
Press OK.
Note
Please select a One Touch key or a
Speed Dial number that has not been
used to store a number.
c
Use the dial pad to enter a Group
number (1 to 8).
Press OK.
(Address Book) and then
5
5
5
33