Switching Users - Brother MFC-7360 User Manual

Chapter 2
e
Use the numeric keys to enter the user
name. (See Entering text in Appendix C
of the Basic User's Guide.)
Press OK.
f
Enter a four-digit password for the user.
Press OK.
g
Press a or b to choose On or Off for
Fax Tx.
Press OK.
After you have set Fax Tx, repeat this
step for Fax Rx, Copy, Scan and PC
Print. When the LCD shows Exit,
press OK.
h
Repeat steps d to g for entering each
additional user and password.
i
Press Stop/Exit.
Note
You cannot use the same name as
another user's name.
Turning Secure Function Lock on/off
If you enter the wrong password, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Secure Function Lock on
a
Press Menu, 1, 6, 1.
b
Press a or b to choose Lock OffiOn.
Press OK.
c
Enter your four-digit administrator
password.
Press OK.
10
Turning Secure Function Lock off
a
Press Menu, 1, 6, 1.
b
Press a or b to choose Lock OniOff.
Press OK.
c
Enter your four-digit administrator
password.
Press OK.

Switching Users

This setting allows you to switch between
registered restricted users or Public mode
when Secure Function Lock is turned on.
Changing to the restricted user Mode
a
Hold down Shift as you press Secure.
b
Press a or b to choose ID.
Press OK.
c
Enter your four-digit password.
Press OK.
Changing to the Public Mode
2
After a restricted user has finished using the
machine, it will return to the Public setting
within the same time as the Mode Timer
setting (Menu, 1, 1). (See Mode Timer
on page 4.) You can also exit from the
restricted user mode by pressing the current
Mode key you are in. Then LCD will ask you
Go to Public?.
Press 1 to choose 1.Yes.
Note
• If the current ID is restricted to the function
you want to use, Access Denied will
appear on the LCD and then the machine
will ask your name. If you are allowed to
access the function you want to use, press
a or b to choose your name and enter your
four-digit password.
Press OK.
2