Table 3: Default Vpls Classifiers - Juniper EX9200 Series Overview Manual

Copyright © 2013, Juniper Networks, Inc.

Table 3: Default VPLS Classifiers

MPLS Label EXP Bits
000
001
010
011
100
101
110
111
NOTE: Forwarding class to queue number mapping is not always one-to-one.
Forwarding classes and queues are only the same when default
forwarding-class-to-queue mapping is in effect. For more information about
configuring forwarding class and queues, see Configuring Forwarding Classes.
On MX Series routers, VPLS filters and policers act on a Layer 2 frame that includes the
media access control (MAC) header (after any VLAN rewrite or other rules are applied),
but does not include the cyclical redundancy check (CRC) field.
NOTE: On MX Series routers, if you apply a counter in a firewall for egress
MPLS or VPLS packets with the EXP bits set to 0, the counter will not tally
these packets.
Chapter 1: CoS Overview
Forwarding Class/Queue
0
1
2
3
4
5
6
7
11