CHAPTER 2
CoS Input and Output Configuration
CoS Inputs and Outputs Overview
Table 4: CoS Mappings—Inputs and Outputs
CoS Mappings
Inputs
classifiers
code-points
drop-profile-map
loss-priority protocol
rewrite-rules
loss-priority
Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
CoS Inputs and Outputs Overview on page 13
Some CoS components map one set of values to another set of values. Each mapping
contains one or more inputs and one or more outputs.
Some CoS components map one set of values to another set of values. Each mapping
contains one or more inputs and one or more outputs. When you configure a mapping,
you set the outputs for a given set of inputs, as shown in
Outputs
forwarding-class
loss-priority
drop-profile
code-points
Default Behavior Aggregate Classification Overview
Configuring Drop Profile Maps for Schedulers
Applying Default Rewrite Rules
CoS Inputs and Outputs Examples
Table 4 on page
Comments
The map sets the forwarding class and PLP for a specific set of code
points.
The map sets the drop profile for a specific PLP and protocol type.
The map sets the code points for a specific forwarding class and
PLP.
13.
13