Juniper EX9200 Series Overview Manual page 66

Class of Service Overview and Examples for EX9200 Switches
52
bandwidth-limit bps;
burst-size-limit bytes;
}
}
tag-protocol-id;
}
(mac-learn-enable | no-mac-learn-enable);
}
(flow-control | no-flow-control);
ignore-l3-incompletes;
link-mode (automatic | full-duplex | half-duplex);
(lloopback | no-loopback);
keepalives <interval seconds> <down-count number> <up-count number>;
speed (1g | 10m | 100m | 10m-100m | auto-negotiation);
source-address-filter {
mac-address;
}
source-filtering | no-source-filtering;
}
flexible-vlan-tagging;
(gratuitous-arp-reply | no-gratuitous-arp-reply);
hold-time (up milliseconds | down milliseconds);
interface-transmit-statistics;
(keepalives <down-count number> <interval seconds> <up-count number> |
no-keepalives);
layer2-policer {
apply-groups [ group-names ];
apply-groups-except [ group-names ];
}
link-mode (automatic | full-duplex);
mac mac-address;
mtu bytes;
multi-chassis-protection peer-ip-address {
interface interface-name;
}
native-vlan-id number;
no-gratuitous-arp-request;
optics-options {
alarm low–light–alarm {
(link-down | syslog);
}
warning low–light–warning {
(link-down | syslog);
}
wavelength nm;
}
passive-monitor-mode;
per-unit-scheduler;
speed (10m | 100m | 1g | auto | oc3 | oc12 | oc48);
stacked-vlan-tagging;
traceoptions {
flag flag;
}
transmit-bucket {
overflow discard;
rate percentage;
Copyright © 2013, Juniper Networks, Inc.