Assembly - ProForm 310 Ce Elliptical User Manual

ASSEMBLY

• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• To identify small parts, see page 5.
1. Attach a Wheel (50) to the front of the Frame (1)
with an M10 x 41mm Shoulder Screw (63).
Repeat this step to attach the other Wheel
(not shown).
• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
one rubber mallet
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
6
1
50
63