How To Set Up The Console - Epic Fitness A35e Elliptical Manual

HOW TO SET UP THE CONSOLE

Before using the elliptical for the first time, set up the
console.
1. Connect to your wireless network.
Note: In order to access the Internet, download
iFit workouts, and use several other features of
the console, you must be connected to a wireless
network. See HOW TO USE THE WIRELESS
NETWORK MODE on page 32 to connect the
console to your wireless network.
2. Check for firmware updates.
First, see step 1 on page 30 and step 2 on page
31 and select the maintenance mode. Then,
see step 3 on page 31 and check for firmware
updates.
3. Calibrate the incline of the ramp.
See step 4 on page 31 and calibrate the incline
of the ramp.
4. Create an iFit account.
Touch the globe button near the lower-left corner of
the screen and then touch the iFit button.
Note: For information about navigating in the
Internet browser, see page 33.
The browser will open to the iFit.com home page.
Touch the Join iFit button in the upper-right corner
of the screen.
The Internet browser will open to the iFit.com
account creation page. Then, fill in the information
fields on the screen to create your iFit account.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode, see page 25. To use
an onboard workout, see page 27. To use a
set-a-goal workout, see page 28. To use an iFit
workout, see page 29.
To use the equipment settings mode, see
page 30. To use the maintenance mode, see page
31. To use the wireless network mode, see
page 32. To use the sound system, see page
33. To use the Internet browser, see page 33.
Note: If there is a sheet of plastic on the screen,
remove the plastic.
Note: The console can display distance in either miles
or kilometers. To find which unit of measurement is
selected, see step 8 on page 30.
24