Epic Fitness A35e Elliptical Manual page 9

6. Identify the Lower Upright Cover (80), which has
a large oval hole in it.
Orient the Lower Upright Cover (80), the Shield
Cover (75), and the Upright (4) as shown. Slide
the Lower Upright Cover and the Shield Cover
upward onto the Upright.
7. While a second person holds the Upright (4)
near the Frame (1), locate the wire tie in the
Upright.
See the inset drawing. Tie the lower end of the
wire tie to the Main Wire Harness (110).
Pull the upper end of the wire tie until the Main
Wire Harness (110) is routed through the
Upright (4).
Tip: To prevent the Main Wire Harness (110)
from falling into the Upright (4), secure the
Main Wire Harness with the wire tie.
6
80
75
7
4
Wire Tie
110
1
9
4
Wire
Wire Tie
Tie
110