Note: If a passcode is enabled, the console will
regularly ask for you to enter the passcode. The
console will remain locked until the correct pass-
code is entered. IMPORTANT: If you forget your
passcode, enter the following master passcode
to unlock the console: 1985.
7. Enable or disable the Internet browser.
To enable or disable the Internet browser, first
touch the Browser button. Next, touch the Enable
checkbox or the Disable checkbox. Then, touch the
back button on the screen.
8. Select the unit of measurement.
Touch the US/Metric button to view the selected
unit of measurement. Next, touch the checkbox for
the desired unit of measurement. Then, touch the
back button on the screen.
9. Select an update time.
To select a time for automatic console updates,
touch the Update Time button and select the
desired time. Then, touch the back button on the
screen.
IMPORTANT: You must still unplug the power
cord after using your elliptical. Set the update
time for a time when you normally use your
elliptical and will be available to unplug the
power cord after an update.
10. Enable or disable the safety key.
This feature is not enabled on your elliptical. Your
elliptical does not have a safety key.
11. Enable or disable the ultrasonic sensor.
The elliptical features an ultrasonic sensor that
can detect an object behind the elliptical. If the
ultrasonic sensor detects an object, one or more
messages will appear on the screen to alert you.
If the object is in the zone closest to the elliptical,
the resistance of the pedals will also automatically
increase. To enable or disable the ultrasonic sen-
sor, first touch the Safety Zone button. Next, touch
the Enable checkbox or the Disable checkbox.
Then, touch the back button on the screen.
Page 30